India

ANSI Single Pitch
PC Chain


 

 

ANSI Single Pitch PC Chain

The pins, outer plates and attachments of these chains are made of SUS304 (spring clips SUS301). White Engineering Plastic is used for the inner link. This combination makes it lube-free, low noise (5 dB lower than ANSI standard roller chain) and lightweight (50% lighter than ANSI standard roller chain). The working temperature range is: -20°C to +80°C. For details on corrosion resistance, please refer to our Corrosion Resistance Guide.

Single Strand Details

Tsubaki ANSI Single Pitch PC Chain
tsubaki-ansi-rs-pc-attachment
Dimensions in mm
Tsubaki Chain No. Pitch (P) Roller Diameter Inner Width
mm Inch R W
RS25-PC 6.35 ¼" 3.30 3.18
RS35-PC 9.525 ⅜" 5.08 4.78
RS40-PC 12.70 ½" 7.92 7.95
RS50-PC 15.875 ⅝" 10.16 9.53
RS60-PC 19.05 ¾" 11.91 12.70
Dimensions in mm
Tsubaki Chain No. Pin Link Plate Max.
Allowable
Load
Approx.
Mass
Diameter Length Thickness Height
D L1 L2 L3 L4 T1 T2 H kN Kg/M
RS25-PC 2.31 4.50 5.50 - - 0.75 1.30 6.00 0.08 0.095
RS35-PC 3.59 6.85 7.85 - - 1.25 2.20 9.00 0.18 0.22
RS40-PC 3.97 8.25 9.95 9.40 16.75 1.50 1.50 12.00 0.44 0.39
RS50-PC 5.09 10.30 12.00 11.90 21.00 2.00 2.00 15.00 0.69 0.58
RS60-PC 5.96 12.85 14.75 14.20 25.75 2.40 2.40 18.10 0.88 0.82
Dimensions in mm
Tsubaki Chain No. Attachment Dimensions
C C1 N O S X XS
RS25-PC 7.95 7.95 5.60 3.40 4.75 11.45 11.65
RS35-PC 10.50 9.50 7.90 3.40 6.35 15.35 14.55
RS40-PC 12.75 12.70 9.50 3.60 8.00 17.80 17.40
RS50-PC 16.00 15.90 12.70 5.20 10.30 23.55 23.05
RS60-PC 19.15 18.30 15.90 5.20 11.90 28.35 26.85
Dimensions in mm
Tsubaki Chain No. Attachment Mass
A
SA
kg/att.
K
SK
kg/att.
Ext.
Pin
kg/att.
RS25-PC 0.0006 0.0012 -
RS35-PC 0.0008 0.0016 -
RS40-PC 0.002 0.004 0.001
RS50-PC 0.003 0.006 0.002
RS60-PC 0.007 0.014 0.003
  • Make sure to check the chain load again when replacing Stainless Steel Chain with PC Chain.
  • Offset links are not available.
  • For details on corrosion resistance selection, please see our Corrosion Resistance Guide.